While a case study solution can be the case study solution itself, there are numerous factors that determine what can be classified as a case study analysis example. A successful analysis of the result of a study is not the end all to a case study analysis solution. The problem lies in the effectiveness of the study itself.
Any type of case study solution will have specific components and patterns. A good rule of thumb for creating a case study analysis example is to work out what specific components exist and then work out how they are to be used in the analysis.
A more specific approach to case study analysis examples allows for the easy creation of a good working solution. This may be achieved by providing all the necessary criteria for an effective case study analysis example.
In order to successfully create a case study analysis example, the following elements must be present:
Properly structured information – the case study analysis example must contain material that creates an outline of the information required for the case study solution. Without the outline, the reader is left to guess or to work out parts of the case study from an empty document.
A clear understanding of the solution – a basic knowledge of the topic required to understand the problem can be found through the introduction and conclusion. A problem, such as a product or service failure, requires an analysis of the root cause, preferably in the introduction and conclusion.
A good way to ensure that the case study analysis example has been written correctly is to check its structure and see if it would make sense to a person with knowledge of the subject. If it does not, the writer may need to obtain additional information.
A case study solution will usually be broken down into sections. While each section can be completed separately, the sections must be combined to form a complete solution.
The sections could include details about the problem, data and information needed to understand the problem, or an outline of the problem. The sections should be self-contained and do not have to interact.
Elements such as the introduction and conclusion are optional but are essential in any case study solution. They provide information about the problem and how the solution was arrived at.
Any successful case study analysis example must start with a thorough analysis of the problem. An outline of the problem is not necessarily required; however, the introduction and conclusion are necessary to set the problem straight and to allow the reader to know the solution.