What Are Battery Abuse Case Study Solutions?
There’s no use arguing about it: this is just the way it is. The reasons for these malfunctions are the result of a variety of different causes. That doesn’t mean we can’t learn from past mistakes and try to prevent future occurrences.
In the United States alone, there are nearly twelve million mobile devices – many of which are operated with an initial battery. Clearly, there is an issue here, but it isn’t as easy to pinpoint the root cause of these problems as some may think. This is why a battery abuse case study was needed.
A battery abusive battery case study would look at all of the variables that might be contributing to the malfunctions. Of course, the specific case study solution and its details will vary from one situation to the next.
The most common reason that devices crash is because they have been discharged to their end-of-life point or too low of a voltage. When these devices are put to use, these issues are compounded.
But what causes these devices to power down, or power up incorrectly? In most cases, the root cause is due to battery aging. In order to learn how to solve these problems, the battery abuse case study needs to include an examination of battery age.
Other factors that go into a batteryabuse case study analysis might include heating and cooling issues. Some of these factors involve the individual handling of the battery, which may not be considered a battery abuse case study in and of itself.
An example of a battery abuse case study solution that utilizes a different battery aging solution to increase battery lifespan is called battery enhancement. Here’s how it works:
The battery goes through a series of tests, each involving different stress levels, which measure the amount of voltage and current that the battery can withstand. Once the battery is subjected to these stresses, the battery is charged to its maximum capacity before the battery age levels is increased.
A battery abuse case study solution like this works by utilizing battery wear leveling, a process which involves the exact same stresses that the battery was subjected to. As the battery ages, it will continue to stay at the same state, preventing it from causing any further malfunctions.
Of course, the problem with a battery abuse case study solution like this is that its positive effects aren’t immediately noticeable. This is why this battery abuse case study solution takes a little longer to begin to show results.
This battery abuse case study solution only makes it possible for a battery to operate longer than it otherwise would. It also makes it possible for it to perform at its maximum capacity during the lowest possible stress levels.